| TRI-PLY
CLAD
Tri-Ply clad is a premium line of clad cookware
with a pure aluminum core between two layers of 18/10 stainless
steel extended all the way up the sidewalls to maximize performance
and to allow heat to spread quickly and evenly from every side.
Tri-ply is oven safe up to 450º F. Cook or boil using only low to
medium heat. These pans are dishwasher safe, but we recommend hand
drying the pans immediately after the rinse cycle to preserve their
original beauty. |
| STAINLESS
STEEL
All stainless steam pans are made of 304-18-8
stainless steel. We currently offer 20 & 24 gauge with flanged rims and
anti-jam collars. The perforated steam pans offer extra holes in the
corner for quick draining and fast steam penetration. Our
Professional Gourmet Presentation Pans are 18-10 stainless steel and
the tri-ply base is induction capable.
These pans are dishwasher safe, but we recommend hand drying the
pans immediately after the rinse cycle to preserve their original
beauty.
|
| STAINLESS
STEEL THERMO PANS
All Thermo pans have a double wall 304-18-8 stainless steel body
which is filled with a conductive fluid to improve heat
distribution, prevent scorching or can be frozen for cold food
application. The Thermo pans can be used directly on an open
flame/sterno, induction or hot plate. These pans are dishwasher
safe, but we recommend hand drying the pans immediately after the
rinse cycle to preserve their original beauty.
|
| NATURALS
The "Naturals" are made of food safe cast aluminum
without the coating and is NSF approved. These items can endure temperatures from –20
up to 450º Fahrenheit. When using a non-caustic detergent,
the product is dishwasher safe. Staining will occur if acidic foods
are put into the natural products.
|
| DURA-DESIGN PLUS
Our new and improved coating, Dura-Design Plus provides a
designer appearance, and is more durable than before. It provides
improved coverage and now has greater adhesion and tensile strength.
All products coated with Dura-Design Plus are NSF approved, for specific listings, please
visit: www.nsf.org . Dura-Design
Plus products will endure temperatures from –20 up to 212 degrees
Fahrenheit. (DO NOT BAKE in the coated Dura-Design Plus products).
If a fault in the coating appears, such as peeling or chipping, the
product must be taken out of service immediately and repaired or
replaced (See Warranty-Replacement &
Recoating Procedures). The intended purpose of the Dura-Design
plus coated products is for serving & display only. They are not
to be used in the preparation of food. Some use environments are,
but not limited to, buffet lines, chafing dishes, catered
environments, and in food display cases. Do not cut directly on the
products, this will cause the coating to scratch and do not put and
of the products in an oven, on a stovetop, under a heat lamp or in a
any other condition where the temperature exceeds 212° F.
Washing by hand is recommended, but when using a non-caustic
detergent, the coating is dishwasher safe. Do not clean with
scouring pads. Only use nylon or sponge pads. Regular dishwashing
will dull the coating. Do not use metal utensils on the Dura-Design
Plus coated products, use plastic utensils only. Our cast aluminum
core gives you an indestructible product that looks great! The New
Dura-Design Plus, presents your products with
style and elegance, but now offers improved durability, better
coverage, greater adhesion and tensile strength, and is available in
a variety of colors! NOTE: Staining
of all Dura-Design Plus coated products will occur, especially, if
used with foods that contain a high acidity. The lighter (white,
ivory, sky blue, and smoke gray) colors are more likely to show the
stain than darker colors. Staining of the products is not covered
under warranty.
|
|